Patio and Driveway Paver Foundation Tips
By: Guest Post
When laying a paver patio, driveway, or walk, it’s important to start with a good foundation of crush stone to prevent settling over time.
After the crushed stone base has been raked and leveled, use a mechanical plate compactor to compact the crushed stone to prevent any future settling.
Next, level a layer of sand on top of the crushed stone, then lay the pavers. Finally, sweep sand into the cracks between the pavers and run the compactor over the area again to make sure the sand fills the gaps between the pavers.
Watch this video to find out more.
This tip brought to you by:
- Tips for Laying a Paver Patio (video)
- How to Lay a Paver Patio (video/article)
- How to Build a Brick Paver Patio (video)
- Installing a Paver Patio (video)
If you’re creating an outdoor surface with pavers to improve your home, you want to do it right. That means starting with a solid foundation of crushed stone base material.
Once the base is in place and graded smooth, it should be compacted with a mechanical plate compactor to prevent future settling. After the sand and pavers are added, run the compactor over the area again to ensure that the sand completely fills the space between the pavers.
These tips brought to you by Pavestone, Creating Beautiful Landscapes.
Videos You May Like
|Sealing Paver Patio or Driveway||Level Paver Patio Sand Base||Paver Patio Great DIY Project||How to Lay a Paver Patio|