How-To Videos

How to Level a Subfloor

By: Danny Lipford
Using floor patching compound to level a subfloor.

Using floor patching compound to level a subfloor.

No matter what kind of flooring you’re installing, it’s important to make sure the surface beneath it is level, smooth and flat. Most subfloors will have low spots that require filling with floor patching compound.

After the floor patch compound has hardened, the subfloor is sanded until it’s smooth before the new flooring is installed. Watch this video to find out more.


Please Leave a Comment

21 Comments on “How to Level a Subfloor”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.

  • Official Comment:

    Thomas Boni Says:
    July 26th, 2018 at 4:22 pm

    Hi, Dee,
    Travertine flooring is porous, so if it was not sealed correctly, problems could arise. Of course, the subfloor also could have problems. Since numerous factors could apply, we recommend getting an in-home consultation.
    Thanks for your question!

  • Dee Says:
    July 19th, 2018 at 12:00 am

    We bought a brand new home, with travetine flooring. After a year, the travertine flooring start cracking on some sections. The contractor was saying, travertine flooring are soft, that’s why it’s cracking. The contractor wants to remove the entire floor and replace with engineered wood. Our suspicion the subfloor were not framed and secured properly. What’s the best solution. The house has a raised floor, we do have a crawl space.

  • terry Says:
    March 8th, 2017 at 11:07 am

    just taken a wall down and have found that the floor is not level .best way of making the two floors level

  • Alex Says:
    February 20th, 2017 at 11:49 pm

    I bought a house that was built in 1924 over a pier and beam crawl space. The floor has been settling over the years to differences of 5″ in some areas. I already paid a foundation contractor to install smart jacks and try to lift certain sections but we weren’t able to lift more than a 1/2″ to 1″ at best. If the gaps are this big, it seems that buying enough concrete self-leveler will be cost prohibitive. Also, trying to remove the existing subfloor proved a challenge as it appears that there are several layers of subfloor that were added over the years so removing all of those layers is quite a bit of work as well. Should we add another layer of plywood with shims on top of the current subfloor to level it? Also not a cheap option but seems like our best option at this point

  • Arleen Says:
    February 20th, 2017 at 2:47 pm

    Paint stripper worked great on removing the black glue

  • Joseph Says:
    January 31st, 2017 at 1:43 pm

    I need to level my kitchen floor for new vinyl. There are places that are off about 3/8 in. what is the best way to level this out with a wood sub floor

  • Nancy Says:
    January 7th, 2017 at 8:45 am

    We are retiling a bathroom in a 50’s ranch. The old tile and cement backing is removed and the 1 x 8 boards over joists are exposed. What is the best subfloor to put over these old boards before using Hardiboard, thinset, and tiling?

  • Irishman Says:
    August 19th, 2016 at 2:31 pm

    Best thing to do is cover floor with backer board or cement board. Half inch. Level and start fresh. Can’t go wrong

  • Larry N. Browning Says:
    June 22nd, 2016 at 9:38 pm

    If I am using backer board is it necessary to level the floor
    How much of a difference in height can a tile floor tolerate.

  • Anthony Vomero Says:
    December 5th, 2014 at 2:59 pm

    Just wanted to say thanks. How to video on subfloors was very helpful.

  • Priscilla Frierson Says:
    August 18th, 2013 at 1:50 pm

    My house was built 1964 or 1970. The kitchen floor has press wood looking boards on the floor.Once I took up old tiles it look push up. In some places of the board. It still have old black glue on it. Some said put concret slab down or mic board. I not trying to send a lot of money and I am doing it myself. What happens if I put down the tiles. I lived there for 30 years. I want to get it ready before the winter

  • Yvette Says:
    February 24th, 2012 at 8:37 pm

    We have acid stained concrete floors and want to lay porcelain tile now. What is the least messiest procedures of preparing the floor? Do I need to put plywood down and then a backerboard of some sort? I would really like the least amount of mess and dust because of allergies if possible. Thanks!

  • Official Comment:

    Julie Day Says:
    August 8th, 2011 at 3:22 pm

    Helen, that black glue is a real mess! When I redid my kitchen, I tried various types of scrapers and solvents to remove the glue without harming the oak hardwood flooring underneath it. I ended up scraping it off by hand with a razor blade, inch by inch. Some areas chipped off much easier than others, and once it was down to just grayish smears, I was able to get the rest off with a power sander.

  • Earla Kirkwood Says:
    March 14th, 2011 at 8:13 pm

    We tiled out kitchen floor 8 years ago. We are now redoing our cabinets. Once removed, the subfloor is lower than the tile floor with backer board and there is a space about 1/2″ under the backerboard resulting in3 tiles cracking when stepped on.
    What is the best material to add under the edge of the backerboard prior to installing the new cabinets?

  • Official Comment:

    Ben Erickson Says:
    February 26th, 2011 at 10:09 pm

    Hi Helen,
    I’ve had that happen to, and have had to throw it out. The only solution I know is to try to buy what you need for the job, and keep any leftovers in a cool place like a basement.

  • Helen Says:
    February 24th, 2011 at 1:45 pm

    When I purchase 5 gallons of joint compound, I have problems with black mold growing on the top of the unused portion when I open the container the next time I need some. I never put any unused portion from a job or add water to the original container. I also put the plastic sheet back over the top. I end up having to throw the compound out as I can’t imagine it would be good to use moldy compound.

  • Helen Says:
    February 24th, 2011 at 1:37 pm

    How can I remove black glue that was used in the 50’s to glue tile down? I used acetone on my basement floor and picked it up with kitty litter and that worked well but it isn’t working on my breezeway floor. Any suggestions?

  • katie Says:
    October 3rd, 2010 at 1:24 am

    I have a small business, sealing and cleaning new and restoring old vinyl and linoleum floors.We recently found that after sealing a linoleum floor, swirl marks on the surface of the floor. My husband is adamant that this is because the substrate or subfloor was not dead-level when the floor was laid.I tend to agree with him as he has over 40 years experience in the use of sealants to seal floors. According to the client the substrate is epoxy that has been diamond-ground to a smooth surface. I think that the client is not
    truthful because the difference in price of an epoxy floor and linoleum is too large.Why would you install an expensive epoxy floor and then cover it with a much cheaper linoleum floor? Your comments will be appreciated?

  • Bill Says:
    August 9th, 2010 at 12:37 pm

    I have an enclosed front sun porch on an 85-year-old home with an slightly uneven floor covered with a faux brick linoleum sheet floor with asbestos matting underneath. Contractors have said we need to pour cement into the porch foundation to the tune of $15,000 to level the floor and then remove the asbestos, etc. before laying a new floor. All I want to do is lay down some ceramic tile (which I will have to do over the linoleum so I don’t have to remove the asbestos). I just want to lay down some plywood and backer board and then tile over that. Will that work? Any other suggestions?? Thanks a lot! Bill

  • Ricardo Says:
    May 4th, 2010 at 1:23 am

    I just brought a new house with a unfinshed walkout basement with a roughed in unfinished bathroom in southern Missouri. I’m in getting ready to start the wall framing. How can I insulate a basement floor so as not have a cold floor in the fall and winter. And should I do that first before putting up the wall framing? I would like finish with carpet don’t know where to start on the floor. Also can I finish the basement bath with a subfloor or just bring the cement up to the sub-floor level to keep the floors even and level? Ricardo

  • Kathrin Says:
    April 9th, 2010 at 10:27 am

    I have a question. I have a woodfloors, the house is old and the room I want to put ceramic tile in is very un level. One corner of the room is approximently 3 inches higer than the other side. If you rool a ball it will go to one corner of the room. I would like to know if you can lay concrete on top of this floor? I am thinking of useing black paper with chicken wire and then put concrete on top. So one corner may have about 1 1/2 inches of concrete and the other about 3 1/2 inches. Also if this idea of mind is ok, then how long must I wait before laying the tile? The room size is 20 feet x 12 feet. I would appreciate your advice. Kathrin

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at

 characters available

How to Level a Subfloor